BlueWave® 200 Version 3.0 UV Curing Spot Lamp with Intensity Adjustment


BW200 V3

BlueWave® 200 Version 3.0 UV Curing Spot Lamp with Intensity Adjustment  Bluewave200 V3.0 Product Data Sheet

Features
  • Patented intensity adjustment feature
  • >17,000 mW/cm2 initial intensity
  • Simple to operate and adjust
  • Easy-to-read, lighted front panel LCD display with enhanced unit status and notification displays
  • Improved user interface for easier operation
  • Up to 2,000 hours useful bulb life
  • Wide range of liquid/fiber, single/multi-pole lightguides available
  • Foot pedal or PLC integration
  • Extended exposure time settings to 9,999.9 seconds
  • Controlled power-up sequence ensures proper temperature
  • Integral shutter with digital timer
  • Fast bulb replacement
  • Proprietary “Cool Blue™” filter virtually eliminates lightguide degradation
  • Smooth front panel surface that is easier to clean

 

BlueWave® 200 Rev. 3.0 Specifications
Initial Intensities
Total (280-450 nm) 40+ W/cm2
Visible (400-450 nm) 17+ W/cm2
UVA1 (320-395 nm) 17+ W/cm2
UVB (280-320 nm) 7 W/cm2
Intensity Adjustment Manual from 1% to 100% output
Power Requirements 100-240 VAC, 50-60 Hz, 2.5 Amps
Power Supplies Solid-state, 200 Watt
Bulb 200 Watt metal-halide bulb included; replacement in less than one minute
Reflector Elliptical; glass with dichroic coating to reflect UV and minimize IR
Shutter Timer Digital LCD timer up to 9,999.9 seconds; manual or timed shutter
Shutter Activation Foot pedal or PLC
I/O Port 15 pin D – sub-miniature connector
Signals
(PLC Integration)
Inputs: Shutter activate, shutter deactivate, lamp control, PLC enable
Outputs: Unit status, temperature fault, shutter fault, lamp status, power status, shutter status, lightguide status, bulb life warning, bulb life expired
Cooling Filtered fan arrangement; thermally controlled to maintain proper lamp temperature
Hour Meter LCD, monochromatic, 320 x 240 px
Overall Dimensions
(W x D x H)
12.5″ x 12.0″ x 6.5″ (31.8 cm x 30.5 cm x 16.5 cm)
Weight 12.75 lbs. (5.78 kg)
System Warranty One year from purchase
Bulb Warranty Ignition warranted for 2,000 hours
Replacement Bulb Part Number 38465
Part Numbers
41014 (lightguide not included)

1 As measured with a Dymax ACCU-CAL™ 50 Radiometer (320-395 nm). Excessive on/off cycles and improper cooling may affect bulb degradation and therefore no warranty is expressed or implied.

Please visit Accessories for Light-Curing System page for Liquid Lightguide details.