BlueWave® LED DX-1000


dx-1000_base_system dx-1000_flood_package dx-1000_lab_package dx-1000_spot_lamp_package

BlueWave® LED DX-1000

Dymax BlueWave LED DX-1000 Curing System 385nm Product Data Sheet

Dymax BlueWave LED DX-1000 VisiCure Curing System 405nm Product Data Sheet

Features Benefits
Curing area up to 1.14″ [2.9 cm] x 1.65″ [4.2 cm] at 3″ [7.6 cm] distance
  • Flexible, configurable light delivery options
  • Small-area cure capability with LED in flood mode
  • Lightguide cure capability with LED in spot mode (using industry-standard liquid or fiber-optic lightguides and existing light delivery fixtures)
High-intensity LED with efficient cooling
  • Consistent LED frequency and intensity output for better process control
  • Longer, more reliable LED life
  • Lower consumables cost (light source & lightguides)
  • Reduction of on-hand “spares” inventory costs
  • Typical LED degradation less than 4% per 1K hours of on-time operation
LED with 385 nm narrow-spectrum output
  • Cooler cures for thermally sensitive substrates
  • Replaces hazardous mercury bulbs with LED for environmentally friendly green manufacturing initiatives
Shutter-free design
  • Reliable operation during curing
  • Lower maintenance costs (no moving parts)
Lower energy consumption than conventional UV lamps (<100 watts)
  • Reduced electrical consumption by up to 80%
Adjustable intensity
(0-100% in 1% steps)
  • Superior accuracy versus “closed loop feedback” or auto-adjusting units
  • Optimum process control
Instant On/Off with 100% duty-cycle capability
  • Highest throughput (exposure cycles “at the speed of light”)
  • Greatly reduced downtime as compared to conventional lamp replacement
Co-optimized to cure a variety of Dymax formulations
  • Compatible with a variety of Dymax and industry light-curable formulations
  • Fewer adhesive products in inventory
Remote irradiator head with cable connection
  • Self-contained irradiator head is light and small enough to mount or move on automated equipment
  • Flexibility to mount the irradiator head up to 10 ft [3 M] from controller

 

BlueWave® LED DX-1000 Specifications
Output
(measured w/ ACCU-CAL™ 50-LED)
1.0 [W/cm2] at 1.0″ in direct emission (flood mode)
15.0 [W/cm2] at 0.5″ with 5 mm x 1 M liquid lightguide (spot mode)
Power Requirements 100-240V, 47-63 Hz (auto ranging); 100 Watts maximum
LED Timer 0.1 to 999.9 seconds
LED Activation Foot switch, front panel, or PLC
Cooling Forced air / fan (controller and irradiator head)
Hour Meter Digital LCD; total unit life time (non-resettable) and total LED exposure time
Controller Dimensions / Weight 6.5″ x 9.0″ x 2.25″ [16.5 cm x 22.9 cm x 5.7 cm] (W x D x H) / 2.4 lbs [1.1 kg]
Irradiator Head Dimensions / Weight 4.0″ x 5.0″ x 4.5″ [10.2 cm x 12.7 cm x 11.4 cm] (W x D x H) / 2.9 lbs [1.3 kg]
Interface Cable Length Standard: 18″ [45 cm]
Optional: 3 ft [0.91 M], 6 ft [1.82 M], 10 ft [3.04 M] lengths available
Unit Warranty Operation warranted for 3 years from purchase
Part Numbers
Package Flood
Mode
Spot
Mode
Lab
Developer
Base
System
No Power Cord* 40750 40980 41000 40560
Asia Version
(Type G Power Cord)
40580 40590 41010      -
Recommended Accessories PN 40505 ACCU-CAL™ 50-LED radiometer