UV Curing System


SPOT LAMP SYSTEM

Dymax-BlueWave-LED-VisiCure-spot-curing-system1

Dymax UV spot-curing units can be supplied with a wide variety of standard or customized light delivery choices. Lightguide options available from Dymax include various diameters (3 mm, 5 mm, and 8 mm), various lengths (1 meter is standard) to 6 meters, liquid or fiber, and single or multi-furcated configurations.

Bluewave 200 Version 3.0 UV Curing Spot Lamp

Bluewave 75 UV Light Curing Spot Lamp

Bluewave LED Prime UVA Spot Curing Lamp

Bluewave LED DX-1000 Small Area Flood & Spot UV Curing System

Bluewave QX4 LED Multi-Head Spot Curing System

 

FLOOD LAMP SYSTEM

5000-ec-uv-flood-lamp-39821

A Dymax UV curing system uses moderate- to high-intensity UV/Visible light for the fast curing of UV adhesives, UV coatings and UV inks. A modular UV curing flood lamp consists of a power supply, reflector housing, and standard 400 Watt metal halide bulb. Shutter assemblies, mounting stands, UV shields, and additional UV curing bulbs are available to create a custom UV curing system.

Consistent line speed, lamp height, and intensity together provide a consistent UV curing process. DYMAX UV curing conveyors eliminate stray UV light despite utilizing some of the highest-intensity UV curing systems on the market.

5000-EC Series Modular UV Curing Flood Lamp

2000-EC Series Modular UV Curing Flood Lamp

1200-EC Series Focus Beam UV Flood Lamp

 

CONVEYOR SYSTEM

Conveyors

Dymax UV curing conveyor systems offer consistent, fast, and safe UV curing. These ultraviolet conveyors are designed for curing of UV curable adhesives, UV curable coatings, and UV curable inks and can be outfitted with standard metal halide (longwave UV), mercury (shortwave UV), or visible bulbs.

Consistent line speed, lamp height, and intensity together provide a consistent UV curing process. DYMAX UV curing conveyors eliminate stray UV light despite utilizing some of the highest-intensity UV curing systems on the market.

UVCS UV Conveyor With 5000-EC Lamp(s)

UVCS Sidecure UV Conveyor With 5000-EC Lamp(s)

UVCS UV Conveyor With Fusion-300 Lamp(s)

 

RADIOMETERS/ UV INTENSITY METERS

Dymax UV and visible radiometers are simple to operate and allow operators to monitor and document a UV/Visible light curing process. A low UV/Visible intensity measurement signals an operator to replace the bulb, reflector, or lightguide. Radiometers can also be used to confirm that operators are properly shielded from UV/Visible exposure. Degradation of curing bulbs, lightguides, and reflectors can decrease intensity, resulting in incomplete cures.

Three Reasons to Use a UV/Visible Radiometer

  • Maintaining a Reliable Light-Curing Process
    A radiometer helps to ensure that a light-curing system is providing the intensity and dosage levels required for successful curing.
  • Providing a Worker-Friendly Light-Curing Process
    ACCU-CAL™ radiometers are sufficiently sensitive to measure the intensity of stray or reflected energy (as little as 1 mW/cm2). Dymax recommends that worker UVA exposure not exceed 1 mW/cm2. For reference, UV (320-395 nm) intensity on a sunny day can range from 2-6 mW/cm2.
  • Measuring Transmission Rates Through Substrates
    A radiometer can be used to measure the transmission rates of various wavelengths through substrates that sometimes absorb various frequencies of energy. To assure an effective curing process it is critical to measure the light intensity reaching the cure site below any intervening substrate.

ACCU CAL SERIES

 

 ACCESSORIES

Eye Proctection

Light Guides

Shields & Stands

Shutters